Product description
DeWalt 1st & 2nd Fix Nailer Twinpack | with 2x 5.0Ah Batteries
Featuring the new DCN930 33° paper/wire collated framing nailer, along with the stalwart DCN660 finishing nailer, this twin pack of 18 volt battery operated nailers is supplied with a charger, two 5.0 Amp-hour batteries and a rolling T-Stak case. Both of the power tools are compatible with the two batteries, which are completely cross compatible with all 18V XR batteries and tools.
The new DCN930 uses momentum in a flywheel to allow sequential firing of nails as fast as two nails per second. At the maximum capability in medium density wood, you can drive ring shanked nails flush up to 90mm. It has a rafter hook which can be folded out of the way. The magnesium magazine is at a 33 degree angle, and accepts both paper collated (DNPT) and wire welded collated (DNW) nails.
The DCN660 is by far DeWalt's most popular finishing nailer, taking 16 Gauge nails from 32mm up to 63mm. The 660 also has a brushless DC motor giving excellent torque for fast run up. You can run in either single fire or sequential fire mode which swaps the functions of the bump nose and trigger switches. In single mode, pressing the nose against the workpiece runs up the motor, and pressing the trigger fires the nail. In sequential mode, you pull the trigger to run the motor up to speed, then when you press the nose against the work it fires the nail; after which you can lift and bump again with the trigger still pressed to keep going.
Features:
- Twinpack of first and second fix nailers.
- Comes with two 5.0 Amp-hour batteries.
- Both nailers run on the 18V XR platform.
- DCN930 accepts DNPT or DNW nails.
- Wire-welded nails ideal for moist environments.
- Both have sequential and single modes.
- Supplied in a rolling T-Stak storage case.
Includes:
1 x DCN930 18V XR 33° Framing Nailer
1 x DCN660 18V XR Finish Nailer
2 x 5.0Ah 18V XR Batteries
1 x Multi-Voltage XR Charger
1 x T-Stak Rolling Case