Product description
DEWALT 10 Piece Brushless Powertool Kit With Four 5.0Ah Batteries
Combi Drill, Impact Driver, SDS Drill, Multi-Tool, Circular Saw, Grinder, Reciprocating Saw, Light, Planer, Sander
A jumbo pack of powertools which uses all brushless motors. These motors give you much longer runtime than older brushed motors and are more reliable as there's no brushes to fail. For drilling in wood, metal, plastic and the occasional concrete or masonry hole there is the DCD996 premium combi drill which features a powerful base-mounted LED worklight with afterglow. For sanding, the DCW210 random orbital sander takes 125mm hook and loop sanding pads and has a rotational arc of 2.6mm for effective sanding performance. For fast and rough cutting of timber or PVC, or even cutting steel section and pipe, there's the extremely compact DCS367 reciprocating saw which can cut up to 300mm in wood. To take down the thickness of timber, the DCP580 planer removes material with incredible speed and is easily adjusted. For cutting and smoothing rebar and other metal bars use the DCG405 angle grinder, which can get close to material with its stubby nose design. For the most awkward types of cuts or sanding tight spots, the DSC355 oscillating multi tool comes with a 29 piece accessory kit for cutting, scraping or sanding. For holes in masonry and concrete that the combi drill can't manage, the extremely lightweight and compact DCH273 rotary hammer drill features an SDS-Plus bit holder as well as rotation stop to also allow light chisel work. Instead of driving in screws and bolts with the combi drill, the DCF887 impact driver is a purpose-built extremely fast screwdriver and nut driver that features impressive torque levels. For cutting large sheets more accurately than the recip saw or multi-tool there is the DCS570 circular saw which takes the cost effective 184 x 16mm saw blades. To illuminate poorly lit areas, the DCL040 has a powerful LED light to give up to 110 lumens of light.
Features:
- Packaged in three ToughSystem cases.
- Everything fits on the ToughSystem DS carrier.
- Includes four 5.0Ah Li-ion battery packs.
- All brushless motors for better battery runtime.
- Dual charger for minimal downtime.
- DS Carrier can be used for bagged material transport.
Includes:
1 x 18V Brushless Combi Drill (DCD996)
1 x 18V Brushless Impact Driver (DCF887)
1 x 18V Brushless SDS+ Rotary Hammer Drill (DCH273)
1 x 18V Brushless Oscillating Multi Tool (DCS355)
1 x 18V Brushless 184mm Circular Saw (DCS570)
1 x 18V Brushless 125mm Angle Grinder (DCG405)
1 x 18V Brushless Reciprocating Saw (DCS367)
1 x 18V Brushless 125mm Random Orbital Sander (DCW210N)
1 x 18V Brushless Planer (DCP580N)
1 x 18V LED Work Light
3 x ToughSystem Cases (DS150, DS300 & DS400)
1 x ToughSystem Trolley (DSCARRIER)
4 x 18V XR 5.0Ah Li-ion Battery Packs
1 x Dual Port XR Battery Charger